Suzhou Indair indoor air technology co.,ltd
Suzhou Indair indoor air technology co.,ltd
Add to Cart
SS304 Portable Dust Free Laminar flow fume Hoods for GMP and lab part clean room
Brief introduction
1,Class 100 Laminar Flow Hood is a kind of air cleaning unit that can offer some high clean environment , can install above needing the craft of high cleanliness to click in a flexible way , clean laminar flow is covered and can be used individually, a lot of all right associations become the clean area of banding.
2,Class 100 Laminar Flow Hood after high-efficient filter, is it shed layer to form with certain wind speed air, make clean air current vertical to flow while being one-way , guarantee workspace reach the cleanliness of the technological requirement, send into the workspace.
3,There are two kinds installing of outer and inside of air blowers, installation way is hanging type and floor support type two kinds.
Cleanliness in the workspace≥0.5m grain of dus≤3.5(FS209E100 grade )
the noise of liter≤64 Db(A)
Average air velocity0.3-0.55m/s
Except that have specification production now according to our factory, can especially design and make according to customer's enquiry .
It is a kind of air purification equipment that can offer some high clean environment that laminar flow is covered. It is made up by case body , air blower , result air cleaner , damping layer , lamps and lanterns of the beginning ,etc. mainly, the outer cover is gushed out and molded. This product can both hang and be supported on the ground, the structure is compact, easy to use. Can use individually, can a lot of connections make up and lead the strong clean area.
1.Specification: HEPA supply outlet is made of fine cold-rolled steel plate with the surface of electrostatic spray. The ingredient of HEPA supply outlet include plenum chamber, HEPA, diffusion perforation panel. With the advantages of small investment and simple construction, HEPA supply outlets are usually installed at the ceiling of clean room as the terminal air purification device.
| Size (L x W x H) | 1035 x 730 x 600 mm 1) | 1340 x 730 x 600 mm | 1340 x 2090 x 600 mm |
| Hepa Size | 915 x 610 x 69 mm-1 PCS | 1220 x 610 x 69 mm-1 PCS | 1220 x 610 x 69 mm-3 PCS |
| Effiency | G4(EN779) | G4(EN779) | G4(EN779) |
| H14(EN1822) | H14(EN1822) | H14(EN1822) | |
| Operating Power | 180W | 240W | 680W |
| Avg Air Velocity | 0.36m/s~0.54m/s | ||
| Touch Sreen | Siemens | ||
| PLC | Siemens | ||
| PAO test port | Φ8MM | ||
| Differential Manometer | DWYER | ||
| Curtain | PC /PVC | ||
| Air Velocity | 0-1 m/s | ||
| Lighting | ≥300 Lux | ||
| Weight | 69 kg | 84 kg | 178 kg |
